CASR The University of Adelaide Australia
spacer
spacer

text zoom: S | M | L

Further Information Contact:

Centre for Automotive Safety Research
THE UNIVERSITY OF ADELAIDE
SA 5005 AUSTRALIA
Email
Location

Telephone: +61 8 8313 5997
Facsimile: +61 8 8232 4995

You are here: 

Publication Details

TitleDevelopment of head protection for car occupants'
AuthorsAnderson RWG, Ponte G, Streeter LD
Year2002
TypeConference Paper
AbstractMcLean et al. (1997) demonstrated that energy absorbing headwear for car occupants might be effective in reducing the numbers of head injuries sustained by car occupants. They estimated that the benefits were greater than the estimated benefits of padding of the upper interior of vehicles to the requirements of the US Federal Motor Vehicle Safety Standard 201. This paper will describe the development of head protection for car occupants (the RARU Headband) that would protect the head of an occupant in a crash. The development process included the testing of candidate materials, the construction of prototypes and ultimately the evaluation of the prototypes according to test methods outlined in FMVSS 201. The evaluation was made by attaching the headband to a free motion headform, and firing the headform at 24 km/h at an unpadded beam that had similar characteristics to a vehicle A-pillar, simulating a frontal collision. Three beams of varying stiffness were used to examine the protective effect of the headband over a range of impact severities. The protective effect was measured by comparing the impact severity between impacts with and without the headband present. Results showed that the headband produced marked reductions in the Head Injury Criterion value compared to the unprotected headform. In beams that produced severe impacts with the unprotected headform, that exceeded the threshold set by FMVSS 201, the headband reduced the severity to safe levels. This study showed that head impact severities can be markedly reduced for car occupants by the use of moderate amounts of head protection in frontal impacts. Further evaluation is required for other impact directions. This study was completed for the Australian Transport Safety Bureau.
PublisherPlevin and Associates Pty Ltd
Publisher CityBurnside
ISBN0646419919
Conference NameRoad Safety Research, Policing and Education Conference
Conference AbbreviationRSR
Conference LocationAdelaide, Australia
Conference Date4-5 November 2002
Journal Volume (Issue)1
Page Range9-14 (vol 1)
Page Count6

Reference
Anderson RWG, Ponte G, Streeter LD (2002) 'Development of head protection for car occupants'', Proceedings of Road Safety Research, Policing and Education Conference, pp 9-14 (vol 1).


Files Available for Download
CASRheadprotectcaroccup419.pdforiginal PDF