CASR The University of Adelaide Australia

text zoom: S | M | L

Further Information Contact:

Centre for Automotive Safety Research

Telephone: +61 8 8313 5997
Facsimile: +61 8 8232 4995

You are here: 

Publication Details

TitlePrevention of head injuries to car occupants: an investigation of interior padding options
AuthorsMoore VM, Simpson DA, McLean AJ, Fildes B, Kloeden CN, Digges KH, Anderson RWG
AbstractHead injuries to car occupants in crashes on Australian roads are a major cause of death and permanent brain damage. Preventing impacts to the head and reducing the severity of the head impacts that do occur has the potential to save many lives and to reduce lifelong suffering by brain damaged individuals and those who have to care for them. This report evaluates the benefits that are likely to accrue from the use of padding materials to reduce the severity of the impact to the head. The report begins with reference to the recent literature on car occupant head injuries. The range of possible head injury countermeasures is then reviewed briefly, with particular reference to padding the upper interior of the passenger compartment. Such padding, or other means of ensuring that the upper interior provides a specified level of head impact protection, will be required on some new cars in the United States in 1998 and all new cars by 2002. If a similar measure were to be adopted in Australia, it would be more than 15 years before half of the cars on the road provided the specified level of head protection. The development of some form of protective headwear, by comparison, would offer the occupants of all cars a way to reduce their risk of sustaining brain damage if involved in a road crash. An analysis of factors related to head, neck and face injuries to car occupants follows, conducted by the Monash University Accident Research Centre (MUARC). The frequency with which various objects in the car cause injury to these body regions is listed, together with whether or not there was intrusion into the passenger compartment affecting the struck object. The role of contact with objects outside the car is also noted, although ejected occupants who had not been wearing a seat belt are not included in the data set. Drivers frequently sustained head injury from contact inside the vehicle with the steering assembly, door panel, instrument panel, roof and side window. The steering assembly was not a significant factor in head injuries to left front passengers. Contacts with A- and B-pillars and header and side rails were not frequently involved in head injuries to front seat occupants. This was thought to have been due to relatively high seat belt wearing rates. The next section of the report presents the results of a detailed analysis of factors related to the occurrence of brain injury in three samples of crash involved car occupants studied by the NHMRC Road Accident Research Unit. On a case by case basis, selected characteristics of the injury to the brain are related to characteristics of the impact to the head and the object struck to identify those cases in which the provision of some means of energy absorption might reasonably be expected either to prevent or significantly reduce the severity of the injury to the brain in a similar crash. The results of this investigation indicate that there is considerable potential for reducing the severity and the consequences of impacts to the head by padding the upper interior of the passenger compartment. However, an even greater level of protection would be provided by the use of protective headwear. Protective headwear, similar to a soft shell pedal cycle helmet, is estimated to be much more effective than padding the car in preventing cases of fatal brain injury and in improving the outcome in cases of severe brain injury. With each of these forms of protection the benefit appears likely to be greatest for cases which would otherwise sustain a brain injury of moderate severity (improved outcome in 40 and 25 per cent of cases respectively). Headwear in the form of an energy absorbing head band covering the forehead and sides of the head would also provide a substantial level of protection (about half the benefits of a bicycle helmet). In Chapter 4 the results of a Harm analysis are presented which estimate the likely financial community benefits which would be expected to come from the introduction of a range of countermeasures aimed at reducing head, neck and/or facial injuries to passenger car occupants involved in road crashes. "Harm" is a metric which estimates the societal cost of a given injury, taking into account the frequency with which that injury occurs as well as treatment, rehabilitation, loss of earnings, pain and suffering costs of injury. Obviously a Harm analysis needs to be based on a representative sample of crashes, as has been attempted in this report, if it is to yield nationally representative estimates. The total annual benefit in terms of reduced Harm are estimated to be about $123 million for padding of the upper interior of the passenger compartment. The estimated benefit for protective headwear (in the form of a helmet) is between $380 million (assuming a fully airbag equipped fleet) and $500 million (assuming no vehicles with airbags). Estimated harm benefits are also given for other protective measures such as air bags alone, both front and side-mounted bags, and improved seat belt systems and penetration resistant side window glazing. The benefits are presented in terms of the savings per vehicle for two discount rates, 5 and 7 per cent. At the former discount rate the estimated benefit in savings of head and face Harm are $154 per car for padding of the upper interior, and $476 and $626 for protective headwear for cars with and without airbags.
Report NumberCR160
PublisherFederal Office of Road Safety, Transport and Communiations
Publisher CityCanberra
SponsorFederal Office of Road Safety (FORS)
Page Count92

Moore VM, Simpson DA, McLean AJ, Fildes B, Kloeden CN, Digges KH, Anderson RWG (1997) Prevention of head injuries to car occupants: an investigation of interior padding options (CR160), Federal Office of Road Safety, Transport and Communiations, Canberra.